Shop

Bosch – LHM0606/xx Ceiling loudspeaker

  • Suitable for speech and music reproduction
  • Flush-mounting in ceiling cavity
  • Easy to install
  • Simple power setting
  • Unobtrusive in virtually all interiors
  • Complies with international installation and safety regulations

The LHM 0606/xx is a general purpose, 6 W, costeffective ceiling loudspeaker. The /00 version is screw mounted and the /10 version is clamp mounted into the ceiling. An optional fire dome LBC 3080/01 is available.

Function

An economic flushing-mounting ceiling loudspeaker is available for general purpose applications. This full range loudspeaker is suitable for both speech and music reproduction in shops, department stores, schools, offices, sports halls, hotels and restaurants. The speaker assembly consists of a single-piece, 6W dual cone loudspeaker and frame, with a 100 V, matching transformer mounted on the back. A circular metal grille is an integrated part of the front. The appearance and neutral white color has been selected to be unobtrusive in virtually all interiors.

Ordering information
LHM 0606/00 Ceiling Loudspeaker

Ceiling loudspeaker 6 W, circular metal grille, ceilingmounted with 3 (white) screws (supplied), white RAL 9010.
Order number LHM0606/00

LHM 0606/10 Ceiling Loudspeaker

Ceiling loudspeaker 6 W, circular metal grille, ceilingmounted with 2 spring clamps, white RAL 9010.
Order number LHM0606/10

Accessories

LBC 1256/00 EVAC Connection Adapter Emergency connection adapter, 3-pole screw ceramic connector with a pre-mounted thermal fuse, to be installed in series with the 100 V primary connection of a loudspeaker unit, set of 100 pieces.
Order number LBC1256/00

LBC 3080/01 Fire Dome

Metal fire dome for the LBC 3087/41, LBC 3090/01, LBC 3090/31, LHM 0606/00, LHM 0606/10, and LHM 0626/00 ceiling loudspeakers, EN54‑24 certified, flame red RAL 3000.
Order number LBC 3080/01

LBC 3080/11 Fire Dome

Metal fire dome for LBC 3087/41, LBC 3090/01, LBC 3090/31, LHM 0606/00, LHM 0606/10 and LHM 0626/00 ceiling loudspeakers, white RAL 9010.
Order number LBC3080/11

 

Specifications

Maximum power 9 W
Rated power6 / 3 / 1.5 W
Sound pressure levelat 6 W / 1 W (1 kHz, 1 m) 94 dB / 86 dB (SPL)
Sound pressure levelat 6 W / 1 W (4 kHz, 1 m) 106 dB / 98 dB (SPL)
Effective frequency range (-10 dB)80 Hz to 18 kHz
Opening angle at 1 kHz/4 kHz (-6 dB) 175° / 55°
Rated voltage 100 V
Rated impedance 1667 ohm
ConnectionFlying leads
Diameter 199 mm (7.8 in)
Maximum depth 70.5 mm (2.8 in)
Mounting cut-out 165 + 5 mm (6.5 + 0.20 in)
Speaker diameter 152.4 mm (6 in)
Weight 620 g (1.37 lb)
Color White (RAL 9010)
Operating temperature -25 ºC to +55 ºC (-13 ºF to +131 ºF)
Storage and transport temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF)
Relative humidity <95%

Certifications

All Bosch loudspeakers are designed to withstand operating at their rated power for 100 hours in accordance with IEC 268-5 Power Handling Capacity (PHC) standards. Bosch has also developed the Simulated Acoustical Feedback Exposure (SAFE) test to demonstrate that they can withstand two times their rated power for short durations. This ensures extra reliability under extreme conditions, leading to higher customer satisfaction, longer operating life, and much less chance of failure or performance deterioration.

Installation

Mounting

The assembly is simply and quickly installed into a hole in the ceiling cavity. The /00 version is secured with the three white screws (supplied). The /10 version is secured by two integral spring-loaded ceiling locking clamps. A circular template for marking a 165 mm diameter hole is included with the
loudspeaker.
Three wires on the matching transformer (primary) provide for selection of nominal full-power, half-power or quarter-power radiation.

Fire dome

During a fire, the ceiling cavity in which loudspeakers are installed can allow flames to spread throughout a building. To prevent fire entering the caving via the loudspeaker, the ceiling loudspeaker can be fitted with a protective steel fire dome (LBC 3080/01). This optional fire dome is mounted on the loudspeaker assembly using four self-tapping screws, supplied as standard. There are four knock-out holes; two (2) for rubber grommets (supplied) and two (2) for cable glands.

Download

Datasheet